Anyhoo, you can use this tute to make simple paper pinwheels for any occasion at any size. It’s so much easier than you would think.
The first thing I did was ask Jacinda to scan some of that awesome bonehead fat quarter she’s giving away as our Friday Surprise Prize this week. She also scanned an embroidered dress of Clare’s from Mexico for me. I printed out the images on two sides of cardstock to make my pinwheels.
Get the full Paper Pinwheel Cupcake Topper Tutorial after the jump and leave a comment if you love skulls and want a bonehead fat quarter to call your own…
How to Make Paper Pinwheels as Cupcake Toppers
First you need paper. You’ll also need some short pushpins (I used regular old thumbtacks), a hot glue gun, and some dowels, skewers, or some sort of stick to attach your pinwheels too. I also used a craft punch shaped like a sun for a little extra embellishment, but not required. And finally, I used some beads, you’ll see why below.
Next step is to cut your card stock into squares. I made mine 3″ square for my big cupcake toppers. then you will want to cut from each corner towards the center, stopping about 1″ from the center:
I used a craft punch to make little suns as an extra embellishment for my fiesta-themed cupcake toppers. So grab your thumbtack or pushpin and poke it through the center of your punched paper if you are using it:
Then you want to hold your square with a flat side at the top, and pull down the left corner, folding it towards the front, and stick your tack through it from the back side, right near the tip of the corner:
This step is even easier if you have a tiny hole punch and you punch tiny holes in the left corner of each side of your square.
Continue to pull each side down from the left corner and slip the tack through it as above:
Once you have all four corners on your pin, slip the pin through the center of the paper so it sticks out the back like so:
Now you want to stick your pin in your skewer (I got these bamboo skewers at Cost Plus World Market). Mine split the skewer but no worries – that will be fixed in the next step:
Dab some hot glue on the end of the pin or tack, then stick a bead around it. I did this to avoid sharp pins sticking out of the back of my pinwheels:
Turn it over. You’re done!
Make up a bunch of ’em. Add jewels if daughter insists.
Apply to cupcake:
Blow on them, they really work!
Now I want to make some fabric pinwheels! or pinwheel broaches! or pinwheel sunglasses…