Make Your Own Hair Clip Board

Does your little girl have a plethora of hair clips that get lost or scattered all over the place? I have found hair clips in my pillowcase, behind the toilet, in the refrigerator, and once in our dog’s food bowl. I need a hair clip organization solution. So, today we are going to turn this storage problem into something pretty by showing you how to make a framed hair clip board with lovely fabric. Now those clips will also be a work of art of sorts. And you could also use your board to display photos, cards, or maybe even earrings?

Colleen from Thumpkin (so cute, check it out) whipped up this beauty and is going to show us how to make a hair clip board after the jump…

How to Make A Beautiful Board for Organizing Hair Clips


  • 11×14 piece of 1/8-inch plywood
  • 11×14 picture frame
  • 11×14 sheet of 1/4-inch foam
  • Paint
  • Fabric
  • Hot glue gun
  • Staple gun (with 1/4-inch staples)
  • Ribbon

1. Cut a piece of 1/4-inch foam to 11×14 and hot glue it to the piece of plywood.

2. Cut out a piece of fabric to 13×15 so that it will cover the top of the board with extra to staple down in the back.

3. Staple gun the fabric to the board. Use only very few staples since you will be stapling all the ribbon down over the fabric.

4. Flip the board right side up. Hammer the ends of the staples down so that they do not pop out of the fabric. Make sure to hammer very carefully so that the staples do not poke through the fabric.

5. Measure out the number of ribbons you want to use. In this case we cut out 7 pieces of ribbon (Five 15 inch pieces and two 18 inch pieces). Place the pieces of ribbon where you would like them to go. With the 15 inch pieces, we placed the outside ribbons down first at about 1 1/2 inches in. Then, we left about 3 inches between the other three ribbons. For the 18 inch pieces we placed them about 2 1/2 inches in from both edges.

6. Staple down the ribbons. Hammer down the staples again very gently.

7. Optional:You can choose to paint the frame you have or keep it as is.

8. Place the hair clip board into the frame and start putting up those clips!

9. You can even make your little one a matching bow!

Also check out the awesome fabric letter hair clip holder Jacinda whipped up last year here, and all of Colleen’s lovely creations at Thumpkin.




According to Lily, my 4 yr old, the floor monster (aka floor vent) eats up their hair bows while they're sleeping at night. I tell you what, the way that girl tells the story anyone would be convinced there was a floor monster. Lol I will definately take advantage of this fantabulous tutorial. Thanks!


Can't you just use the back of the frame instead of a separate piece of plywood? (Just hopeful since if so, I have everything on hand to make this tonight 😉


@cd I was thinking of doing the same thing but instead of staples, I was thinking glue since the back would be considerably thinner without the plywood.


[…] did a blend of this design and this one.  Just need to hang them and we’re good to go! Frames were super-sale with coupon from […]


MSI’s own “Afterburner” software programs are currently the most powerful graphics card overclocking software available. Besides the basic frequency adjustment and system monitor, miracle traffic bot allows the user to adjust the voltage for the GPU…




Leave a Reply

Your email address will not be published. Required fields are marked *